Gossen Labocolor 300 Color analyzer


 

Gossen Labocolor 300 color analyzer intended for use in a darkroom together with your regular timer. With this analyzer you can analyze the negative and determine the proper filter settings of your enlarger. For setting up the analyzer several test sets are available like for Agfa, Kodak and Fuji films.

Gossen is not only making equipment for other companies but also use equiipment from others under their name. If you take a look inside the analyzer you will see that the PCB's are marked with Wallner. Actually the Labocolor 300 is nothing more or less than the Wallner CA 5062 Analyzer.
 
 
  Technical data:

12.02.2010
  Manufacturer
Name
Introduction
Sensor
Measurement
Application		 P. Gossen & Co, Erlangen Germany
Labocolor 300 Color analyzer
19..
Selenium photo cell
negative for color enlarger
Darkroom / color analisys
  Memory
Memory range		 4 memory locations for Y, M and C
200 densitometric filter units
  Size
Weight
Power
Manual		 200 x 80 x 150 mm
aprox. 1030 g
100/110/115 V or 220 ~ 240 V 50 ~ 60 Hz.
No
 
Labocolor 300 testset for Agfa film.		  


   

Copyright © E. van der Aa 2010, All rights reserved.